SHANGHAI ESURVEY GNSS CO., LTD.
32
To set free station, do the following:
1. To enter Program menu page, press MENU and F1 PROG / 1.
2. Press F3 / 3:
o : it indicates that settings are done.
o : it indicates that settings are not done.
3. Do the following:
a. Set a Job
If you have done it in before, you can skip it.
b. Set Accuracy Limit
c. Start Free Station
5.2.3.1 Set a Job
See 5.2.1.1 Set a Job for details.
5.2.3.2 Set Accuracy Limit
It is used to define a limit for the standard deviation values. If the calculated deviation
exceeds the limit, a warning dialog box pops to remind you whether to proceed or not.
To set accuracy limit, do the following:
1. To enter ACCURACY SETTING display, in FREE STATION display, press F2 / 2:
2. Set deviations of north, east and height.
3. Press F4 SET for confirmation. The display returns to FREE STATION display.
To Next Page
Loading...
Need help?
General