SHANGHAI ESURVEY GNSS CO., LTD.
73
5.2.11.4.4 Transfer Data
It is used to upload known data (control point and plane alignment) and download results
of staking out and measurement.
During transferring data, please do not power off or do other operations.
To transfer data, do the following:
1. To enter ROAD DATA TRANSFER display, in ROAD MENU display, press F4 / 4:
o Transfer Type
Upload: to upload data to total station via PC. It is only appropriate for
known data (control point and plane alignment).
Download: to send data to PC via total station. It is appropriate for all
types of data.
o Data Type: including control point, stakeout results, cross-sectional, and
plane alignment.
o Swap Mode
No: the same types of existed data will not be deleted.
Yes: the same types of all existed data in current job will be deleted.
2. Press F4 ENT for confirmation.
To Next Page
Loading...
Need help?
General