e-survey E3L - Set Bearing-Distance

SHANGHAI ESURVEY GNSS CO., LTD.
39
2. Input data, and press F2 CALC for computing. BEARING-BEARING display shows:
3. Input a name for the new point and press F4 REC for record. The display shows
Data Saved and automatically returns to BEARING-BEARING display.
5.2.4.4.2.2 Set Bearing-distance
The principle is as follows:
To set bearing-distance, do the following:
1. In INTERSECTIONS display, press F2 / 2.
2. Input data, and press F2 CALC for computing. BEARING-DISTANCE display
shows: