C
HAPTER
39
| LLDP Commands
– 1303 –
lldp med-tlv location This command configures an LLDP-MED-enabled port to advertise its
location identification details. Use the no form to disable this feature.
SYNTAX
[no] lldp med-tlv location
DEFAULT SETTING
Enabled
COMMAND MODE
Interface Configuration (Ethernet, Port Channel)
COMMAND USAGE
This option advertises location identification details.
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv location
Console(config-if)#
lldp med-tlv
med-cap
This command configures an LLDP-MED-enabled port to advertise its Media
Endpoint Device capabilities. Use the no form to disable this feature.
SYNTAX
[no] lldp med-tlv med-cap
DEFAULT SETTING
Enabled
COMMAND MODE
Interface Configuration (Ethernet, Port Channel)
COMMAND USAGE
This option advertises LLDP-MED TLV capabilities, allowing Media Endpoint
and Connectivity Devices to efficiently discover which LLDP-MED related
TLVs are supported on the switch.
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv med-cap
Console(config-if)#
To Next Page
Loading...
Need help?
General
