Edge-Core ECS3510-52T User Manual

C HAPTER 14 | Basic Administration Protocols
Simple Network Management Protocol
– 466 –
WEB INTERFACE
To configure trap managers:
1. Click Administration, SNMP.
2. Select Configure Trap from the Step list.
3. Select Add from the Action list.
4. Fill in the required parameters based on the selected SNMP version.
5. Click Apply
Figure 260: Configuring Trap Managers (SNMPv1)
Figure 261: Configuring Trap Managers (SNMPv2c)

Edge-Core ECS3510-52T Specifications

General

Brand	Edge-Core
Model	ECS3510-52T
Category	Network Router
Language	English