C
HAPTER
14
| Basic Administration Protocols
Simple Network Management Protocol
– 467 –
Figure 262: Configuring Trap Managers (SNMPv3)
To show configured trap managers:
1. Click Administration, SNMP.
2. Select Configure Trap from the Step list.
3. Select Show from the Action list.
Figure 263: Showing Trap Managers
CREATING SNMP
N
OTIFICATION LOGS
Use the Administration > SNMP (Configure Notify Filter - Add) page to
create an SNMP notification log.
CLI REFERENCES
◆ "nlm" on page 788
◆ "snmp-server notify-filter" on page 789
◆ "show nlm oper-status" on page 790
◆ "show snmp notify-filter" on page 791
To Next Page
Loading...
