C
HAPTER
24
| General Security Measures
Web Authentication
– 888 –
web-auth
system-auth-control
This command globally enables web authentication for the switch. Use the
no form to restore the default.
SYNTAX
[no] web-auth system-auth-control
DEFAULT SETTING
Disabled
COMMAND MODE
Global Configuration
COMMAND USAGE
Both web-auth system-auth-control for the switch and web-auth for an
interface must be enabled for the web authentication feature to be active.
EXAMPLE
Console(config)#web-auth system-auth-control
Console(config)#
web-auth This command enables web authentication for an interface. Use the no
form to restore the default.
SYNTAX
[no] web-auth
DEFAULT SETTING
Disabled
COMMAND MODE
Interface Configuration
COMMAND USAGE
Both web-auth system-auth-control for the switch and web-auth for a
port must be enabled for the web authentication feature to be active.
EXAMPLE
Console(config-if)#web-auth
Console(config-if)#
To Next Page
Loading...
