Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-32 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
A/D No Subsystem Voltage Input active
Display Fail active
___________________________________________________________________________________
Command<1>: ALARMS V SHUNT
SHUNT ACTIVE ALARMS AS OF xx:xx:xx ON xx/xx/xx
Description Alarm Status
Shunt01 [type fail/com fail]
Shunt02 [type fail/com fail]
Shunt03 [type fail/com fail]
Shunt04 [type fail/com fail]
Shunt05 [type fail/com fail]
...
Shunt16 [type fail/com fail]
___________________________________________________________________________________
Command<1>: ALARMS V LVD
LVD ACTIVE ALARMS AS OF xx:xx:xx ON xx/xx/xx.
Description Alarm Status
LVD 1A [inhibited/failed/active]
LVD 1B [inhibited/failed/active]
LVD 2A [inhibited/failed/active]
LVD 2B [inhibited/failed/active]
LVD 3A [inhibited/failed/active]
LVD 3B [inhibited/failed/active]
The following is displayed only for active potentiometer controlled LVDs:
[LVD 3A] [active]
[LVD 3B] [active]
[LVD 4A] [active]
[LVD 4B] [active]
___________________________________________________________________________________
Command<1>: ALARMS V PCU[n]
Which PCU (1-56)?
PCU## ACTIVE ALARMS AS OF xx:xx:xx ON xx/xx/xx.
Alarm Status
Com Fail active
Sense Lead Open active
Lost AC Feed active
High Voltage Shutdown active
Input Switch OFF active
Emergency Stop active
Thermal Current Limit active
Conversion Element Fail active
Circuit Breaker is Open active
A/D Failed active
Fan slowed or stopped active
To Next Page
Loading...
Need help?
General
