Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-166 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SET EMAIL
Description: Set Email alarm notification parameters.
Command Level: 6
Syntax: SET EMAIL
Comments: Enter the addresses in the format nnn.nnn.nnn.nnn, where 0 ≤ nnn ≤ 255.
Notes: SMTP server must be capable of relaying Emails outside of the domain. The
Email return address must be on the same domain.
Also set the "IP Network Address", "IP Gateway Address", and "IP Netmask" using the
commands IP ADDRESS, IP GATEWAY, and IP NETMASK.
Related Commands: IP ADDRESS, IP GATEWAY, IP NETMASK
Example:
Command<6>: set email
Primary DNS Address : 0.0.0.0
Secondary DNS Address : 0.0.0.0
Local SMTP Server Address : 0.0.0.0
Email Return Address :
Enter Primary DNS Address :
To Next Page
Loading...
Need help?
General
