User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 2. Operating LMS1000 Page 2-1
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
CHAPTER 2
OPERATING LMS1000
TABLE OF CONTENTS
LMS Description .............................................................................................................. 2-3
Components of LMS ................................................................................................. 2-3
LMS Channel Numbering Scheme ........................................................................... 2-3
Local Controls and Indicators.......................................................................................... 2-6
LMS Display Option .................................................................................................. 2-6
Location and Identification ........................................................................................ 2-6
LMS CPU Circuit Cards ............................................................................................ 2-6
Accessing the System through a Local or Remote Terminal .......................................... 2-8
Passwords and Access Levels ................................................................................. 2-8
Terminal Requirements............................................................................................. 2-8
Local Terminal Access.............................................................................................. 2-9
Remote Terminal Access.......................................................................................... 2-9
Using a Terminal....................................................................................................... 2-9
Logging On To the System ..................................................................................... 2-11
Callback Feature..................................................................................................... 2-12
Header Information ................................................................................................. 2-12
Logging Off of the System ...................................................................................... 2-12
Accessing LMS1000 via TELNET and TFTP ................................................................ 2-13
Accessing LMS1000 via SNMP (if SNMP Software Option is installed) ....................... 2-13
Management Information Base (MIB) User Interface ............................................. 2-13
Using the TL1/X.25 Port (if TL1/X.25 Software Option is installed) .............................. 2-14
Using the TL1 Port (if TL1 [over Ethernet] Software Option is installed) ...................... 2-14
Using the Gateway Port (if Gateway Software Option is installed) ............................... 2-15
Using Programmable Commands ................................................................................. 2-17
Using the Alarm Cutoff Feature..................................................................................... 2-18
Forcing On Relays or LED's .......................................................................................... 2-18
Acknowledging System Alarms ..................................................................................... 2-19
Getting Analog and Function Channel Statistics........................................................... 2-19
Using the Scan Feature................................................................................................. 2-19
Using the Rate Feature (Analog Channel Maximum Load Percentages Report) ......... 2-20
Viewing and Clearing the Alarm Log ............................................................................. 2-20
Viewing and Clearing the Event Log ............................................................................. 2-22
Using Status Pages ....................................................................................................... 2-27
Using Information Pages ............................................................................................... 2-28
Using the Mail Service................................................................................................... 2-28
Methods of Obtaining Specific Information.................................................................... 2-29
Downloading and Uploading the Configuration............................................................. 2-30
Downloading and Uploading Using XMODEM ....................................................... 2-30
Downloading and Uploading Using TFTP............................................................... 2-32
To Next Page
Loading...
Need help?
General
