Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-268 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SET VORTEX SYSTEM MODE
Description: Toggles the VPS operating mode (float output voltage or test/equalize
output voltage).
Command Level: 6
Syntax: SET VORTEX SYSTEM MODE
SE V SY MODE
Comments: The current operating mode is displayed, followed by a prompt to change
the operating mode.
Notes: None
Related Commands: none
Example:
Command<6>: SET V SYSTEM MODE
System Mode: Float
System Mode (Float or TestEq):
To Next Page
Loading...
Need help?
General
