Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-208 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SET LPS SYSTEM TSTEQTIME
Description: Sets the "timed equalize feature's equalize time period" value
Command Level: 6
Syntax: SET LPS SYSTEM TSTEQTIME
SE LP SY TSTEQT
Comments: The current value is displayed, followed by a prompt to enter a new value.
Notes: The following message is displayed if the setting was not accepted by the MCA.
Not Changed!
Related Commands: none
Example:
Command<6>: set lps sys tsteqt
Manual Test/Equalize Time: 1 hrs.
Manual Test/Equalize Time: 2
New Manual Test/Equalize Time Accepted.
To Next Page
Loading...
Need help?
General
