Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-42 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
BOARDS
Description: Displays the circuit cards installed in the LMS1000 System Network. The
information includes the type and location of the I/O hardware, the version of the I/O
hardware, and the present operating status of the I/O hardware.
Command Level: 2
Syntax: BOARDS [[X]node_number]
B [[X]node_number]
Comments: The system determines which circuit cards are in the network at power-up
or reset. If no modifier is used when entering the command, all nodes in the network are
listed.
Notes: none
Related Commands: none
Example:
Command<6>: boards
Node #0 Unit: Central Office : Unit # 1 - Main Chassis
Card Description Version Status
Card 1: 4 Channel Universal Analog 1.0.0 OK
Unit Board Status:
Modem: 56000 bps
Node #1 Name: LPS Bay #1 - BAY
Card Description Serial Number
Router Module 01 0002801621
Dist. Panel 01 0050331648
Dist. Panel 02 0050397185
Relay Control board 01-01 0067108864
I/O board 01-04 0084082691
Node #2 Name: LPS Bay #2 - BAY
Card Description Serial Number
Router Module 02 0016843009
Dist. Panel 01 0050462976
I/O board 02-03 0085394178
Node #21 Name: - Expansion Assembly
Card Description Version Status
8 Binary/24 Shunt 2.1.0 OK
Node #22 Name: - Expansion Chassis
Card Description Version Status
To Next Page
Loading...
Need help?
General
