Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-278 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
UPLOAD
Description: Allows transfer of configuration information to the system from any
personal computer capable of uploading and downloading a file to a disk using XMODEM
protocol with CRC error checking.
Command Level: 6
Syntax: UPLOAD
UP
Comments: The UPLOAD command expects to receive information that is from a
DOWNLOAD command. Before using the upload command it is recommended that the
defaults first be set (SET DEFAULTS).
Notes: The personal computer must be equipped with a communications software
package which allows saving of information and transfer of information to a floppy disk,
hard disk, or RAM. The software package must also be capable of uploading information
from the personal computer to another device, such as the system. Refer to the
communications software package instruction manual for specific operating information.
Related Commands: DOWNLOAD
Example:
Command<6>: UPLOAD
UPLOAD using XMODEM Protocol with CRC error checking
To Next Page
Loading...
Need help?
General
