User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-15
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
IP Networking Commands
This section provides an alphabetical list of all IP Networking commands available when
the SNMP software option is installed, with a short description of each command.
IP Networking Commands Description
IP
display the IP Network variables
IP ADD <address>
add a new host to the list of authorized hosts
IP ADDRESS <address>
set the units IP address
IP DELETE <address>
remove a host from the list of authorized hosts
IP GATEWAY <address>
set the units gateway address
IP NETMASK <address>
set the units network netmask
To Next Page
Loading...
Need help?
General
