User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-311
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
TRAPS VERSION
Description: Change the version of SNMP TRAPS sent by the system.
User Access Level: 6
Syntax: TRAPS VERSION <V1 | V2>
Comments: This tells the system whether V1 formatted or V2c traps will be created
when a trap is sent.
Notes: The system supports both Version 1 and Version 2c traps.
Related Commands: TRAPS
TRAPS ADD
TRAPS DELETE
TRAPS ON
TRAPS OFF
Example:
Command<6> : TRAPS VERSION V1
To Next Page
Loading...
Need help?
General
