Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-276 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
TIMEOUT
Description: Lists the length of time that the system will remain on-line without a
command, carriage return, or line feed being entered.
Command Level: 2
Syntax: TIMEOUT
TIMEO
Comments: At the end of the time interval, the system will terminate the
communications session.
Notes: none
Related Commands: SET TIMEOUT
Example:
Command<2>: TIMEOUT
User timeout: 300 seconds.
To Next Page
Loading...
Need help?
General
