User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-147
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SCAN VORTEX
Description: Lists status/alarms and values of monitored voltage/current points of the
VPS.
Command Level: 1
Syntax: SCAN VORTEX, SCAN VORTEX SYSTEM, SCAN VORTEX SUBSYSTEM,
SCAN VORTEX PCU[PCU_number], SCAN VORTEX LVD, SCAN VORTEX
MCA
S V, S V SYSTEM, S V SUBSYSTEM, S V PCU[PCU_number], S V LVD, S V
MCA
Comments: Status of a specific VPS entity can be viewed separately by entering the
command STATUS V followed by a space and then the entity specifier (SYSTEM,
SUBSYSTEM, PCU[PCU_number], LVD, or MCA).
Notes: SCAN VORTEX PCU[PCU_number] gives a continuous scan of that PCU.
Only installed PCUs are displayed.
The following is displayed if there are no PCUs installed.
VORTEX PCU STATUS AS OF xx:xx:xx ON xx/xx/xx.
Chan Description Value Units Alarm Status
No PCUs installed
The following is displayed if there are no active MCA alarms.
VORTEX MCA STATUS AS OF xx:xx:xx ON xx/xx/xx.
Description Alarm Status
No active MCA alarms
The following is displayed if there are no digital LVDs installed.
LVD STATUS AS OF xx:xx:xx ON xx/xx/xx.
Description Alarm Status
No digitally controlled LVDs installed
Potentiometer controlled LVD's are displayed only when the LVD
circuit is active.
The following is displayed if there are no subsystem installed.
VORTEX SUBSYSTEM STATUS AS OF xx:xx:xx ON xx/xx/xx.
Chan Description Value Units Alarm Status
No Subsystem Installed
Related Commands: SCAN
Example:
Command<1>: SCAN V
VORTEX SYSTEM STATUS AS OF xx:xx:xx ON xx/xx/xx.
Chan Description Value Units Alarm Status
A9001 Vortex System Voltage +50.3 VDC [None]
[High Voltage #1]
[High Voltage #2]
[Battery On Discharge]
To Next Page
Loading...
Need help?
General
