Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-156 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SET ANSWER
Description: Determines the number of rings before the system answers an incoming
telephone call.
Command Level: 5
Syntax: SET ANSWER
SE AN
Comments: This command can be useful for locations having only one phone line. The
system can be set to answer after five rings, permitting any personnel at the installation
an opportunity to answer the phone before the system.
Notes: The number of rings defaults to 1 but can be programmed for up to 99 rings.
Related Commands: ANSWER
Example:
Command<5>: SET ANSWER
Rings before answer: 1
Enter New #:
Rings before answer: 1
To Next Page
Loading...
Need help?
General
