User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-155
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
channels monitoring "battery string two" may be configured with sub-access identifier
name BATSTR2. Etc.
Now, to associate the sub-entities (each rectifier, each battery string, etc.) to the entity
(the power plant), you configure the access identifier to include all LMS1000 channels
monitoring this entity and any sub-entity contained within.
Related Commands: AID
Example:
Command<6>: SET AID
Which Access Identifier? 3
ACCESS IDENTIFIER 3 CONFIGURATION:
Name: AID03
Type: EQPT
CHANNELS: None
Name:
Type:
Enter channel (eg. A0012 or A0001-6) or D to display.
Add channel:
Enter channel (eg. A0012 or A0001-6) or D to display.
Del channel:
To Next Page
Loading...
Need help?
General
