Emerson LMS1000 User Manual

User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-13
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
LPS Power System Interface Commands
This section provides an alphabetical list of all LPS Power System Interface commands,
with a short description of each command.
LPS Power System
Interface Commands
Description
PRCONFIG LPS
list settings and equipment inventory
PRCONFIG LPS
DISTRIBUTION
list equipment inventory of Distribution Elements
PRCONFIG LPS INVENTORY
list equipment inventory of all Elements
PRCONFIG LPS N<#>-<#>
list equipment inventory of Bay/MCA Elements
PRCONFIG LPS PCU
list equipment inventory of PCU Elements
PRCONFIG LPS SETTINGS
list settings
SET LPS
configure LPS Power System settings
SET LPS CANIO
set LPS MCA CAN I/O circuit card parameters
prompted to select which LPS MCA CAN I/O circuit card, then which
parameter to set
(configurable parameters are…
designate the alarm state for MCA CAN I/O circuit card binary inputs,
designate MCA CAN I/O circuit card analog input as "auxiliary" or
"distribution", set the scale factor for MCA CAN I/O circuit card analog input
and output)
SET LPS MESSAGE
CANIO_BD
set MCA CAN I/O circuit card custom messages
SET LPS MESSAGE
DISTRIBUTION
set Distribution Elements custom message
SET LPS MESSAGE MCA
set MCA custom message
SET LPS MESSAGE PCU<n>
set specified PCU custom message
SET LPS MESSAGE RELAY
set Relay Elements custom message
SET LPS MESSAGE ROUTER
set Router Elements custom message
SET LPS PASSWORD
set MCA logon password
SET LPS PCU<n>
turn specified PCU On or Off
SET LPS SYSTEM
BATONDISCH
set system Battery On Discharge alarm
SET LPS SYSTEM CURLIMIT
set system current limit
SET LPS SYSTEM
EQMULTIPLIER
set system "Auto-Equalize Time Multiplier"
SET LPS SYSTEM FLTVOLT
set system float voltage
SET LPS SYSTEM
HI1TEMPALM
set system High Temperature 1 alarm
SET LPS SYSTEM
HI2TEMPALM
set system High Temperature 2 alarm
SET LPS SYSTEM
HIVLTALM1
set system High Voltage 1 alarm
SET LPS SYSTEM
HIVLTALM2
set system High Voltage 2 alarm

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English