Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-56 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
CLR STATS
Description: Resets the analog and function channel statistics.
Command Level: 4
Syntax: CLR STATS
CLR STATS A[[node_number]channel_number]
CLR STATS F[channel_number]
CLR ST
CLR ST A[[node_number]channel_number]
CLR ST F[channel_number]
Comments: Any user clearing statistics will have his name and this action recorded in
the event log. Entering the channel type and number after the command resets statistics
for the specified channel only.
Notes: Future statistics will be based on information collected after this command is
entered.
Related Commands: STATS, CLRSTAT
Example:
Command<4>: CLR STATS
Reset all channel stats (Y or N): Y
Statistics are cleared.
To Next Page
Loading...
Need help?
General
