Emerson LMS1000 User Manual

Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-358 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
RETRIEVE-USER-SECURITY
(RTRV-USER-SECU)
Referenced In: TR-TSY-000835, Issue 3; pg. 103
General Description: Retrieves a user’s security parameters. The calling identifier
(<cid>) parameter (i.e., LMS1000 user primary phone number), and user access privilege
(<uap>) parameter (i.e., LMS1000 user access level) of the specified user is retrieved.
Related Commands: None
LMS1000 Access Level: 6
An error response with the error code PICC is returned if this command is entered by a
valid user whose level of access is less than the access level of this command.
LMS1000 Equivalent: None
LMS1000 Input Format Variations:
<aid>
The access identifier (<aid>) parameter is the same value as the user identifier (<uid>)
parameter for the user whose security parameters are being retrieved. If the user being
retrieved is not an active user, then an error response is returned with the error code
IIAC.
LMS1000 Response Format Variations:
<cid>
This is the calling identifier parameter of the user whose security parameters are being
retrieved. The value is derived from the PRIMARY PHONE attribute from the specified
user’s LMS1000 user configuration. It can either be the network address or the phone
number of the specified user. If the primary phone number parameter does not meet the
syntax requirements for the <cid> parameter, the error code PIFC is returned.
<uap>
This is the user access privilege parameter of the user whose security parameters are
being retrieved. The value is derived from the ACCESS LEVEL attribute from the
specified user’s LMS1000 user configuration.
<keyword-defined block>
This parameter has no relevance in LMS1000 and is not be returned.

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English