Emerson LMS1000 User Manual

Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-218 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SET PERIODS
Description: Allows you to set one of eight time period intervals that can be used in the
control programs as a variable (P term).
Command Level: 5
Syntax: SET PERIODS [n]
SE PE [n]
Comments: The time period is specified using the format FROM: hh:mm:ss TO:
hh:mm:ss.
Notes: The "FROM" time does not necessarily have be to less than, or before, the "TO"
time. As an example, if time period 1 "FROM" time is set to 08:00:00 and the "TO" time
is set to 07:00:00, then the control program term P1 will be true 23 hours a day. It will be
false between 7:00 and 8:00 in the morning.
Related Commands: PERIOD
Example:
Command<5>: SET PERIODS
Which Time Period (1 - 8) ? 1
Time Period No. 1 - FROM TO
FROM time (hh:mm:ss) 08:15:00
TO time (hh:mm:ss) 16:00:00
Time Period No. 01 - FROM 08:15:00 TO 16:00:00

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English