Emerson LMS1000 User Manual

Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-332 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
OPERATE-ALARM CUTOFF
(OPR-ACO-{EQPT|ALL})
Referenced In: TR-NWT-000833, Issue 5; pg. 4-149
General Description: Cuts off the office audible alarm indications without changing the
local alarm indications.
Only alarms which are currently active at the time the command is received are affected.
LMS1000 remains capable of transmitting its current alarm and status conditions.
This command functions in the same manner as LMS1000 command SET ACO, with one
exception. If the command modifier EQPT is used, only those channels with an access
identifier type of "EQPT" are affected by the alarm cutoff function.
An entry is made in the LMS1000’s event log indicating this command was executed by
the current sessions user. The event description indicates that the alarm cutoff feature
was operated for the specified access identifier.
Related Commands: None
LMS1000 Access Level: 4
An error response with the error code PICC is returned if this command is entered by a
valid user whose level of access is less than the access level of this command.
LMS1000 Equivalent: SET ACO
LMS1000 Input Format Variations: The command code modifier COM is not
supported.
<aid>
Specifying a value of ALL for the access identifier (<aid>) parameter initializes all
registers for all access identifiers of the type defined by the command code modifier. The
value of the access identifier parameter must be ALL. A NULL value is not permitted for
this parameter. Invalid values received for this parameter return an error response with
the error code IIAC.
LMS1000 Response Format Variation: None

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English