User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-331
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
120 Clear alarm log and event log and hour-average/max-min peak statistics, and
clear all channels which have been ACOed and all control channels (relay,
LED) which have been forced on manually.
127 Perform a system cold restart (i.e., a power-up reset). The user session and
possibly the connection is terminated.
Invalid values received for this parameter return an error response with the error code
shown below.
If <ph> is greater than or equal to zero and less than or equal to 127, the error code is
IDNV.
If <ph> is less than zero or greater than 127, the error code is IORD.
LMS1000 Response Format Variations: Since a normal response cannot be sent after
a cold restart, a normal response is sent immediately prior to executing the cold restart
function.
To Next Page
Loading...
Need help?
General
