Emerson LMS1000 User Manual

Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 1-4 Chapter 1. Introduction
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
LMS1000
SPEC. NOS.
586505000 and 586505500
Remote
Dial-Up &
Reporting
Port
OEM2*
Comm
Port
e.g. CPU Fail Alarm,
Power Alarms,
Rectifier Control,
Energy Management
and Sequential Start
(relays are not
required for a
Vortex Power System)
e.g. Rectifier Fail,
Fuse Fail,
Battery Alarm,
Door Open
e.g. Voltages,
Currents,
Temperatures
RS-232 Modem RS-232/
RS-422,
selectable
Relay
Outputs
Binary
Inputs
Analog
Inputs
Local
LED's
VPS
(Vortex
Power
System)
Port
(OEM3*)
RS-485
OEM1*
Comm
Port
RS-232
Ethernet Port
(TELNET, SNMP,
TFTP, WEB, TL1)
Local
Terminal
Port
or
RS-232
Port*
*
Software Dependent:
See Lists 60, 61, 79, 84, 85, 86, and 88 descriptions in SAG586505000/SAG586505500.
Expansion Ports
(to expansion
cabinets and/or
assemblies)
Figure 1-1
Block Diagram (586505000/586505500 LMS Cabinet)
(Note that Spec. No. 582140000 LPS Power System does not use the
LMS Cabinets. The LMS is factory integrated into the LPS Power System.)

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English