Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-172 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Limit 4 Service Effect Code: NSA
Limit 4 Service Effect Code:
Limit 4 Alarm Class Number: 0
Condition Type: TOOLOW
Condition Type:
Limit 4 Condition Description:
VOLTAGE IS TOO LOW
Condition Description:
___________________________________________________________________________________
Command<6>: SET LIMITS F0001
FUNCTION CHANNEL 1 ALARM LIMITS AS OF 20:35:52 ON 02/09/01.
Chan Description
F0001 Function Channel 1
Limit / Name Class Condtype Ntfc Svef
5000.H ABOVE 5000 TOOHIGH CR SA
Condition Description
CURRENT IS TOO HIGH
4000.H ABOVE 4000 HIGH CR SA
Condition Description
CURRENT IS HIGH
100.0L BELOW 100 LOW CR SA
Condition Description
CURRENT IS LOW
50.00L BELOW 50 TOOLOW CR SA
Condition Description
CURRENT IS TOO LOW
Limit 1 Enabled: Yes
Limit 1 Enabled (Y or N):
Limit 1 Value: 5000.
Limit 1 Value:
Limit 1 Type: H
Limit 1 Type is High or Low (H or L):
Limit 1 Name: ABOVE 5000
Limit 1 Name:
Limit 1 Notification Code: CR
Limit 1 Notification Code:
Limit 1 Service Effect Code: SA
Limit 1 Service Effect Code:
Limit 1 Alarm Class Number: 0
Condition Type: TOOHIGH
Condition Type:
Limit 1 Condition Description:
CURRENT IS TOO HIGH
Condition Description:
Limit 2 Enabled: Yes
Limit 2 Enabled (Y or N):
Limit 2 Value: 4000.
Limit 2 Value:
Limit 2 Type: H
Limit 2 Type is High or Low (H or L):
Limit 2 Name: ABOVE 4000
Limit 2 Name:
Limit 2 Notification Code: CR
Limit 2 Notification Code:
Limit 2 Service Effect Code: SA
Limit 2 Service Effect Code:
To Next Page
Loading...
Need help?
General
