Emerson LMS1000 User Manual

Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-228 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SET SYSTEM
Description: Programs system and user configuration parameters.
Command Level: 6
Syntax: SET SYSTEM
SE SY
Comments: This command combines the function of several SET commands, allowing
system and user information to be entered via a single command. The SET SYSTEM
command is explained in detail in the Configuration Chapter of the separate Installation
Manual.
Notes: Channel configuration parameters are set using the CONFIG command.
Related Commands: CONFIG
Example:
Command<6>: set system
Date is 08/17/01.
Use Format mm/dd/yy
Time is 11:39:28.
Use Format hh:mm:ss
LMS1000 V1.0 CRC: 1F1C26EB
Unit Name: Central Office - Unit #1
System Identifier(SID):
Unit Name:
Unit #
System Identifier(SID):
Unit Header:
Unit Pager Code:
LMS1000 V1.0 CRC: 1F1C26EB
Unit Name: Central Office - Unit #1
System Identifier(SID):
Rings before answer: 1
Enter New #:
Rings before answer: 1
USER NO. 1 CONFIGURATION
Name: User #1 Occurred Alarm Report: No
Password: 1 Retired Alarm Report: No
Access Level: 1 Persistent Alarm Report: No
Callback: No Persistent Alarm Report Period: 0m

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English