Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-288 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
IP
Description: Display information regarding the user configurable IP Network variables.
Command Level: 6
Syntax: IP
Comments: This command displays all the relevant IP information.
Notes: If the Network Address, Netmask, or Gateway Address is 0.0.0.0, the address
will be displayed as NONE. If there are no hosts on the access list, the command
displays:
No host access list. Unrestricted access granted.
The authorized host list is the list of remote computers permitted to access the system via
telnet, TFTP, or SNMP. Hosts are identified on the list by their IP address. The list
supports a maximum of 32 entries.
If there are no hosts on the list, access is granted to any computer attempting to connect
to the system.
Related Commands: IP ADD
IP ADDRESS
IP DELETE
IP GATEWAY
IP NETMASK
Example:
Command<6> : IP
IP Network Address : 216.32.74.51
IP Gateway Address : 216.32.74.1
IP Netmask : 255.255.255.0
Ethernet Address : 00:0C:0A:60:12:2C
IP Authorized Hosts : 216.32.74.42
216.32.74.43
To Next Page
Loading...
Need help?
General
