Emerson LMS1000 User Manual

User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-329
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
This parameter does not apply to LMS1000. The only valid value for this parameter is
NULL. Invalid values received for this parameter return an error response with the error
code IDNV.
<tmper>
This is the accumulation time period for the Performance Monitoring (PM) information.
This parameter is not supported by LMS1000. The only valid value for this parameter is
NULL. A NULL value causes the parameter to default to 1-HR. Invalid values received
for this parameter return an error response with the error code IDNV.
<mondat>
This parameter is not supported by LMS1000. The only valid value for this parameter is
ALL. Invalid values received for this parameter return an error response with the error
code IDNV.
<montm>
This parameter is not supported by LMS1000. The only valid value for this parameter is
ALL. Invalid values received for this parameter return an error response with the error
code IDNV.
LMS1000 Response Format Variations: None

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English