EnGenius ESR600 - Configuring Guest Network DHCP Server

84
Conguring the DHCP Server Setting
TheGuestNetworkSSIDshouldbeonadifferentsubnetfromtherouter’sDHCPserver.
ToviewtheDHCPServerSettings,clickGuest Network then select DHCP Server Setting.
Router IP address
DenetherouterIPaddress
fortheGuestnetwork.
Default Subnet Mask
DenetheSubnetMaskIP
addressfortheGuest
network.
Start IP
TodenetheGuestnetworkDHCPserverstartIP.
End IP
TodenetheGuestnetworkDHCPserverendIP.
ClickApply to save the settings or Cancel to discard changes.