EnGenius ESR600 - Configuring Static IPv6

88
Conguring Static IPv6
ToviewtheStaticIPv6settings,clickIPv6 then select Static IPv6.
Use Link-Local Address
EnableordisableLANlink-localaddress.
IPv6 Address
EntertheLAN(local)IPv6addressfortherouter.
Subnet Prex Length
Enterthesubnetprexlength.
Default Gateway
Enterthedefaultgateway.
Primary IPv6 DNS Address
EntertheprimaryIPv6DNSaddress.
Secondary IPv6 DNS Address
EnterthesecondaryIPv6DNSaddress.
LAN IPv6 Address
EntertheLANIPv6address.
LAN IPv6 Link-Local Address
EntertheLANIPv6link-localaddress.
Enable Automatic IPv6 Address Assignment
EnableordisableautomaticIPv6addressassignment.
Autoconguration Type
Entertheautocongurationtype.(Default:SLAAC+RDNSS).
Router Advertisement Lifetime
EntertheIPv6AddressLifetime(inminutes).
ClickApply to save the settings or Cancel to discard changes.