Epson EB-L735U - Shutting off the Image and Sound Temporarily

Shutting Off the Image and Sound Temporarily
101
You can temporarily turn off the projected image and sound.
This is effective when you want to redirect your audience's attention during a
presentation.
Any sound or video action continues to run, however, so you cannot resume
projection at the point that you stopped it.
a
Press the [A/V Mute] button on the control panel or remote control.
The light source turns off and the projected image and sound are
interrupted.
b
To turn the image and sound back on, press [A/V Mute] again.
a
• The projector's power automatically turns off 30 minutes after A/V
Mute is enabled. You can disable this feature.
s Operation > A/V Mute Timer
• If you selected A/V Mute as the Release A/V Mute setting in the
Operation menu, you can still control the projector while A/V Mute
is enabled.