Projector Indicator Status
223
The indicators on the projector indicate the projector status and let you know
when a problem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
a
• If the indicators display a pattern not listed in the table below, turn
the projector off, unplug it, and contact Epson for help.
• When the Indicators setting is set to Off in the projector's
Operation menu, all indicators are off under normal projection
conditions.
A
WLAN (wireless LAN) indicator
B
Filter indicator
C
Temp (temperature) indicator
D
Laser indicator
E
Status indicator
F
On/Standby (power) indicator
Projector status
Indicator and status Problem and solutions
Power: Lit blue
Status: Lit blue
Laser: Off
Temp: Off
Filter: Off
Normal operation.
Power: Lit blue
Status: Flashing blue
Laser: Off
Temp: Off
Filter: Off
Warming up, shutting down, or cooling down.
When warming up, wait about 30 seconds for an image
to appear.
All buttons are disabled during warm-up, shutting
down, and cooling down.
Power: Lit blue
Status: Off
Laser: Off
Temp: Off
Filter: Off
Standby, sleep mode, or monitoring.
When you press the power button, projection starts.
Power: Flashing blue
Status: Off
Laser: Off
Temp: Off
Filter: Off
Preparing for monitoring or quick startup mode. All
features are disabled.
Power: Indicator status
varies
Status: Flashing blue
Laser: Flashing orange
Temp: Indicator status
varies
Filter: Indicator status
varies
Refresh Mode is in progress.
s Management > Refresh Mode
To Next Page
Loading...
Need help?
General
