Projector Administration Settings - Management Menu
192
Settings on the Management menu let you customize various projector
administrative features.
Setting Options Description
User Button Various menu
options available
Assigns a menu option to the [User]
button on the remote control for one-
touch access.
User's Logo Start Setting
Reset
Creates a screen that the projector
displays to identify itself and enhance
security.
Control Panel Lock Full Lock
Except for Power
Off
Controls projector button locking to
secure the projector:
• Full Lock: locks all buttons.
• Except for Power: locks all buttons
except the power button.
• Off: no buttons locked.
Setting Options Description
Color Uniformity Color Uniformity Set to On to adjust the color tone balance
for the whole screen.
Adjustment Level Sets the adjustment level.
Start Adjustments Adjusts the red, green, and blue color
tones individually for the selected area.
Reset Resets all adjustment values on the Color
Uniformity menu to their default
settings.
Refresh Mode Timer Sets a time period during which the
projector displays the refresh image.
Messages Set to On to display a message informing
you that the projector is in refresh mode.
Start Starts the refresh mode process to clear
any projected afterimage and turn off the
projector after a specified period of time.
Press any button on the remote control
to cancel this process.
Light Source
Calibration
Run Now Starts light source calibration to optimize
the white balance of the currently
projected image. You may not be able to
start calibration if the projector's
environmental temperature is out of
range. (Wait 20 minutes after turning on
the projector before starting calibration
for the best results.)
Run Periodically Set to On to perform light source
calibration periodically every 100 hours
of usage.
Last Run Displays the date and time of the last
light source calibration.
Date & Time Date & Time
Daylight Saving
Time
Internet Time
Adjusts the projector's system time and
date settings. Select Daylight Saving
Time to set daylight saving time settings
for your region. Select Internet Time to
automatically acquire the time from an
Internet time server.
To Next Page
Loading...
Need help?
General
