Projecting Multiple Images Simultaneously
88
Unsupported Input Source Combinations for Split
Screen Projection
These input source combinations cannot be projected simultaneously.
• HDMI2 and HDBaseT
• Computer1 and Computer2
• USB and LAN
a
When you split the screen into quarters and select the USB and the
Screen Mirroring input source at the same time, you can select only
one Screen Mirroring source.
Split Screen Projection Restrictions
Operating restrictions
The following operations cannot be performed during split screen projection.
• Setting the projector's menu
• E-Zoom
• Switching the aspect mode (the aspect mode is set to Auto)
• Operations using the [User] button on the remote control, other than
displaying the network information on the projected surface.
• Applying the Dynamic Contrast setting
• Applying the Image Shift setting
• Displaying the network information on the projected surface by a method
other than pressing the [User] button.
• Displaying the Screen Mirroring information bar
Image restrictions
• Even if you set No-signal Screen to Logo in the projector's Display menu,
the blue screen appears when no image signal is being input.
• When you create a single unified image projected from multiple projectors
and use the split screen feature, the second projector does not detect an
image signal.
gg Related Links
• "Zooming In/Zooming Out of Images (E-Zoom)" p.104
• "Image Aspect Ratio" p.72
• "Zooming Images (E-Zoom)" p.103
• "Turning On Automatic Luminance Adjustment" p.75
• "Adjusting the Menu Settings" p.177
To Next Page
Loading...
