Projecting in Content Playback Mode
95
File contents File type
(extension)
Details
Movie .avi
(Motion
JPEG)
• Version: AVI 1.0 only
• Resolution: 1280 × 800 or less
• Size: 2 GB or less
• Movie Codec: Motion JPEG
• Audio Codec: LPCM or IMA ADPCM
• Audio Sampling Rate: 11.025 kHz, 22.05 kHz, 44.1
kHz, 16 kHz, 24 kHz, 32 kHz, or 48 kHz
.mp4/.mov
(H.264/H.2
65)
• Resolution: 1920 × 1200 or less
• Size: 2 GB or less
• Movie Codec: H.264/MPEG-4 AVC or H.265/MPEG-
H HEVC
• Profile:
• H.264/MPEG-4 AVC: Baseline Profile, Main Profile,
High Profile
• H.265/MPEG-H HEVC: Main Profile
• Color Format: YUV420
• Audio Codec: MPEG-4 AAC-LC, or LPCM
• Audio Sampling Rate:
• MPEG-2 AAC-LC: 44.1 kHz, 48 kHz
• MPEG-4 AAC-LC: 44.1 kHz, 48 kHz
• LPCM: 11.025 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32
kHz, 44.1 kHz, or 48 kHz
Switching to Content Playback Mode
Before you project your playlists, you need to switch to Content Playback
mode.
a
Turn on the projector.
b
Press the [Menu] button, select the Operation menu, and then press
[Enter].
c
Select the Content Playback setting and set it to On.
You see a confirmation prompt.
d
Turn off the projector, then turn it on again to enable Content Playback
mode.
To Next Page
Loading...
Need help?
General
