Turning On Automatic Luminance Adjustment
75
You can turn on Dynamic Contrast to automatically optimize the image
luminance. This improves the image contrast based on the brightness of the
content you project.
a
Turn on the projector and switch to the image source you want to use.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Image menu and press [Enter].
d
Select Dynamic Contrast and press [Enter].
e
Choose one of the following options and press [Enter]:
• Normal for standard brightness adjustment.
• High Speed to adjust brightness as soon as the scene changes.
f
Press [Menu] or [Esc] to exit the menus.
To Next Page
Loading...
Need help?
General
