Wireless Network Projection
134
Attention
Never remove the module while its indicator is blue or flashing, or while you are
projecting wirelessly. This could damage the module or lose data.
a
The indicator on the wireless LAN module does not operate. See the
wireless LAN indicator on the projector to check the wireless LAN
status.
a
Use a cross-head screwdriver to remove the screw that secures the
wireless LAN module cover.
b
Connect the wireless LAN module to the USB-A port.
c
Attach the cover comes with your wireless LAN module, and secure it
in place with the screw.
Connection Methods for Wireless Network Projection
Choose a connection method for connecting your computer and projector
over a network based on your network environment.
• Simple AP mode lets you directly connect to smartphones, tablets, or
computers using your projector as an access point. When you use this
method, connect the projector using Quick Connection Mode of the Epson
To Next Page
Loading...
Need help?
General
