Image Quality Settings - Image Menu
180
Settings on the Image menu let you adjust the quality of your image. The
available settings depend on the currently selected color mode and input
source.
Setting Options Description
Color Mode See the list of
available color
modes
Adjusts the vividness of image colors for
various image types and environments.
Brightness Various levels
available
Lightens or darkens the overall image.
Contrast Various levels
available
Adjusts the difference between light and
dark areas of the image.
Color Saturation Various levels
available
Adjusts the intensity of the image colors.
Tint Various levels
available
Adjusts the balance of green to magenta
tones in the image.
Setting Options Description
Sharpness Various levels
available
Adjusts the sharpness or softness of
image details.
White Balance Color Temp. Sets the color temperature according to
the color mode you selected. Higher
values tint the image blue and lower
values tint the image red.
Setting is only displayed when Color
Filter is not set to Warm White or Cool
White.
s Operation > Content Playback >
Overlay Effect > Color Filter
G-M Correction Makes fine adjustments to the color tone.
Higher values tint the image green and
lower values tint the image red.
Custom Adjusts the individual R (red), G (green),
and B (blue) components of the offset
and gain.
Dynamic Contrast High Speed
Normal
Off
Adjusts the projected luminance based
on the image brightness.
Image
Enhancement
Image Preset Mode Sets the Image Enhancement options as
a batch using preset values.
Noise Reduction Reduces flickering in images.
MPEG Noise
Reduction
Reduces the noise or artifacts seen in
MPEG video.
Deinterlacing Sets whether or not to convert
interlaced-to-progressive signals for
certain video image types.
• Off: for fast-moving video images.
• Video: for most video images.
• Film/Auto: for movies, computer
graphics, and animation.
Setting is only displayed when the
current signal is interlaced signal
(480i/576i/1080i).