Projector Security Features
125
b
Select Password and press [Enter].
You see the prompt "Change the password?".
c
Select Yes and press [Enter].
a
If you select No, the Password Protection setting menu is
displayed again.
d
Hold down the [Num] button on the remote control and use the
numeric buttons to set a four-digit password.
The password displays as **** as it is entered. A confirmation prompt is
displayed when you enter the fourth digit.
e
Enter the password again.
You see the message "Password accepted". If you enter the password
incorrectly, a message is displayed prompting you to re-enter the
password.
f
Press [Esc] to return to the menu.
g
Make a note of the password and keep it in a safe place.
Selecting Password Security Types
After setting a password, you see this menu, allowing you to select the
password security types you want to use.
If you do not see this menu, hold down the [Freeze] button on the remote
control for 5 seconds until the menu appears.
• To prevent unauthorized use of the projector, set the Power On Protection
setting to On.
• To prevent changes to the projector's settings, select the Menu Protection
setting, press [Enter], and select the options as necessary.
• To prevent changes to the User's Logo screen or related display settings,
set the User's Logo setting to On.
• To prevent changes to the projector's schedule settings, set the Schedule
setting to On.
• To prevent changes to projector's network settings, set the Network
setting to On.
You can attach the password protect sticker to the projector as an additional
theft deterrent.
To Next Page
Loading...
Need help?
General
