Viewing the Status Display
226
You can monitor the projector's status and view error information from the
status display.
a
Turn on the projector.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Management setting and press [Enter].
d
Select Display Logs and press [Enter].
e
Select Display Status and press [Enter].
f
Press the left or right arrow buttons to view different categories of
information.
• Status Information: The projector's operating status
• Source: Input signal information
• Signal Information: Input digital signal information
• Network Wired: Wired LAN settings
• Network Wireless: Wireless LAN settings
• Maintenance: Operating time for the projector and light source
• Version: The projector's firmware version
gg Related Links
• "Projector Status Display Messages" p.226
Projector Status Display Messages
Categories on the status display let you view information about the projector
and its operation.
a
Status messages are available only in English.
Status Information category
Information Description
System See the System status information table.
Source Displays the source currently being used.
On-ScreenDisplay Displays the settings for on-screen displays. When turned
off, menus or messages are not displayed on the projected
images.
A/V Mute Displays the A/V Mute status.
Intake Air Temp Displays the air intake temperature.
Internal Temp Lv Displays the projector's internal temperature.
Laser Status Displays the operating status of the light source.
Source category
To Next Page
Loading...
Need help?
General
