Projector Network Settings - Network Menu
196
a
Once you have connected your projector to your network, you can
select projector settings and control projection using a compatible Web
browser. This allows you to access the projector remotely.
gg Related Links
• "Network Menu - Network Settings Menu" p.196
• "Using the Wireless Presentation System to Connect Windows/Mac
Computers" p.143
Network Menu - Network Settings Menu
Settings on the Network Settings menu let you select the basic network
settings.
a
If you are connecting via wireless LAN, make sure the followings to
enable wireless LAN settings:
• Install the wireless LAN module to your projector
(EB‑L720U/EB‑L520U).
• Turn on the Wireless LAN Power setting in the projector's
Management menu.
Setting Options Description
Projector Name Up to 16
alphanumeric
characters
(do not use " * + ,
/ : ; < = > ? [ \ ] ` |
spaces)
Enter a name to identify the projector
over the network.
Setting Options Description
Remote Password Up to 8
alphanumeric
characters
(do not use * :
spaces)
Enter a password for accessing the
projector using the Basic Control of the
Epson Web Control. (User name is
EPSONREMOTE; default password is
guest.)
Setting is only displayed when Content
Playback is set to Off in the projector's
Operation menu.
Web Control
Password
Up to 8
alphanumeric
characters
(do not use * :
spaces)
Enter a password for accessing the
projector over the Web. (User name is
EPSONWEB; default password is
admin.)
Priority Control
Interface
Wired LAN
Wireless LAN
Sets the priority gateway.
Simple AP On
Off
Set to On to enable simple access point
mode for direct connection between your
projector and input devices. Make sure
you are also doing the following:
• Using Quick Connection Mode of
Epson iProjection
• Using Screen Mirroring connection
• Using the optional wireless
presentation system
Setting is only displayed when Wireless
LAN Power is set to On in the
projector's Management menu.
SSID Automatically
assigned SSID
Displays the SSID of the projector for
selection on your device in simple AP
connections.
Security WPA2-PSK Displays the security type for simple AP
connections.
Passphrase Various
passphrases from 8
to 63 characters
Enter the passphrase of the projector for
entry on your device in simple AP
connections.
To Next Page
Loading...
Need help?
General
