Epson EB-L735U User Manual

Supported Features for the Epson Projector Professional Tool
258
Your projector supports the following features and options for the Epson
Projector Professional Tool software.
a
• The Epson Projector Professional Tool software does not support
multiple projector connected in a chain using HDMI Out Setting in
the projector's Multi-Projection menu and the HDMI Out ports.
• If you change the Screen Type and Screen Position settings, the
Geometry Correction settings are reset.
• If you want to turn on the projector through the HDBaseT
transmitter, set the A/V Output setting to Always On in the
projector's Signal I/O menu.
Features/Options EB‑L735U/EB‑L730
U/EB‑L720U/EB‑L6
35SU/EB‑L630SU/E
B‑L630U/EB‑L530U
/EB‑L520U
Camera Assist
features
-
Layout/Monitorin
g tab
Input Voltage
-
Setting tab Lens Control tab -
Initial Setting >
Basic 3 tab
Startup
(Shutter)/Standby
(Shutter)
-
Fade-in
(seconds)/Fade-out
(seconds)
-
Shutter Timer You can set this as
the projector's A/V
Mute Timer
setting.
Standby
Confirmation
-
Features/Options EB‑L735U/EB‑L730
U/EB‑L720U/EB‑L6
35SU/EB‑L630SU/E
B‑L630U/EB‑L530U
/EB‑L520U
Reset All Config The following
settings are also
reset:
• Color
Uniformity
• Color Matching
Reset Screen
Matching
Only the following
settings are reset:
• Color
Uniformity
• Color Matching
Geometry
Correction tab
Curved Surface
-
Corner Wall -
Marker display
when dragging and
dropping a point
-
Adjustments
outside the
projection area
-
An absolute
coordinate value
and a relative
coordinate value
✓
General menu Geometry
Correction File
-
Projector File -

Epson EB-L735U Specifications

General

Brand	Epson
Model	EB-L735U
Category	Projector
Language	English