Using Multiple Projectors
119
c
Select Color Adjustment and press [Enter].
The adjustment areas are displayed based on the Edge Blending setting.
d
Use the arrow buttons to select the area you want to adjust and press
[Enter].
The selected area is displayed in orange.
a
When multiple screens are overlapping, adjust based on the area
with the most overlap (the brightest area). In the illustration
below, first align (2) with (1), and then adjust so that (3) aligns
with (2).
e
Adjust the black tone.
You can use the Brightness buttons to adjust the RGB values at the
same time.
f
Repeat steps 4 and 5 as needed to adjust any remaining screen areas.
g
When you are finished, press [Menu].
To Next Page
Loading...
Need help?
General
