Wireless Network Projection
140
a
If you want to set up WPA3-EAP or WPA2/WPA3-EAP security, make
sure your digital certificate file is compatible with projector registration
type and placed directly on a USB storage device.
b
Press the [Menu] button, select the Network menu, and press [Enter].
c
Select Network Settings and press [Enter].
d
Select the Wireless LAN menu and press [Enter].
e
Select the Security setting and press [Enter].
f
Select the security settings to match your network settings.
g
Do one of the following according to the security you selected.
• WPA3-PSK or WPA2/WPA3-PSK: Select Passphrase, press [Enter],
and enter a passphrase from 8 to 63 characters long. Then go to step
16.
• WPA3-EAP or WPA2/WPA3-EAP: Select EAP Type and press
[Enter].
h
Select the protocol for authentication as the EAP Type setting.
i
To import your certificate, select the certificate type and press [Enter].
• Client Certificate for the PEAP-TLS or EAP-TLS type
• CA certificate for all EAP types
To Next Page
Loading...
Need help?
General
