Image Shape
62
e
Select Arc Correction and press [Enter].
You see the Arc Correction screen.
f
Select Arc Correction and press [Enter].
You see the area selection screen.
g
Use the arrow buttons to select the area of the image you want to
adjust, then press [Enter].
h
Press the arrow buttons to adjust the image shape of the selected area as
necessary.
To return to the area selection screen, press [Enter].
a
If you see this screen, you cannot adjust the shape any further in
the direction indicated by the gray triangle.
i
Repeat steps 7 and 8 as needed to adjust any remaining corners.
j
When you are finished, press [Esc].
To Next Page
Loading...
Need help?
General
