Adjusting the Image Color
78
a
• If you set the Color Mode setting to DICOM SIM in the
projector's Image menu, select the adjustment value according
to the projection size.
• If the projection size is 120 inches or less, select a small
value.
• If the projection size is 120 inches or more, select a large
value.
• Medical images may not be reproduced correctly depending on
your settings and screen specifications.
f
If you want to make finer adjustments, select Custom and press
[Enter].
g
Press the left or right arrow buttons to select the color tone you want to
adjust on the gamma adjustment graph. Then press the up or down
arrow button to adjust the value and press [Enter].
h
Press [Menu] or [Esc] to exit the menus.
To Next Page
Loading...
