Adjusting the Image Resolution
80
• Noise Reduction
• MPEG Noise Reduction
• Deinterlacing
• Super-resolution
• Detail Enhancement
g
Adjust each setting in the projector's Image menu individually as
necessary.
• To reduce flickering in images, adjust the Noise Reduction setting.
• To reduce the noise or artifacts seen in MPEG video, adjust the
MPEG Noise Reduction setting.
• To convert interlaced-to-progressive signals for certain video image
types, adjust the Deinterlacing setting.
• Off: for fast-moving video images.
• Video: for most video images.
• Film/Auto: for movies, computer graphics, and animation.
a
Setting is only displayed when the current signal is interlaced
signal (480i/576i/1080i).
• To reduce blurring appeared when projecting low resolution image,
adjust the Super-resolution setting.
• To create a more emphatic texture and material feel of the image,
adjust the Detail Enhancement setting.
a
The settings value in the preset option are overwritten.
h
Press [Menu] or [Esc] to exit the menus.
To Next Page
Loading...
Need help?
General
